meta data for this page
IPv6
ff::/8 | multicast | ff0x is reserverd | ||
ff01::1 | multicast | all nodes | interface local | |
ff02::1 | multicast | all nodes | link local | ping ff02::1%tun2 |
ff01::2 | multicast | all routers | interface local | |
ff02::2 | multicast | all routers | link local | |
ff03::2 | multicast | all routers | site local | |
fe80::/10 | link local address | |||
fc00::/7 | Unique Local Address (ULA) | fc00::/7 and fd00::/7 | ||
2000:: | Global address | first | ||
3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff | Global address | last |
- /etc/network/interfaces
iface eth0 inet dhcp iface eth0 inet6 static address 2001::2 netmask 64 up -ip -6 route add ::/0 via 2001::1 dev eth0 down ip -6 route del ::/0 via 2001::1 dev eth0
Autoconfig and RA
http://strugglers.net/~andy/blog/2011/09/04/linux-ipv6-router-advertisements-and-forwarding/
Auto configuration can be disabled temporary for eth1 with:
sudo sysctl -w net.ipv6.conf.eth1.autoconf=0 sudo sysctl -w net.ipv6.conf.eth1.accept_ra=0
or for all interfaces with:
sudo sysctl -w net.ipv6.conf.all.autoconf=0 sudo sysctl -w net.ipv6.conf.all.accept_ra=0
Reenabling works by using 1 instead of 0 in the call.
RADVD
Router ADVertisement Daemon. This daemon listens to router solicitations (RS)
and answers with router advertisement (RA). Furthermore unsolicited RAs are also sent from time to time.
This protocol is meant for host auto-configuration and not for route propagation between routers.