Differences

This shows you the differences between two versions of the page.

--- linux:sw:nut:snmp [2021/07/07 13:32]
niziak created
+++ linux:sw:nut:snmp [2021/07/07 14:34] (current)
niziak
@@ Line 11: / Line 11: @@
 ===== NUT config =====
-<file ini /etc/nut/nut.conf>
+==== UPS config ====
-MODE=netserver
-</file>
 <file ini /etc/nut/ups.conf>
@@ Line 32: / Line 30: @@
 <code bash>systemctl enable nut-driver.service</code>
+==== Local UPS monitor ====
+<file ini /etc/nut/upsd.users>
+[local_mon]
+    password  = local_mon_pass
+    upsmon master
+</file>
+<file ini /etc/nut/upsmon.conf>
+MONITOR UPS3000XL@localhost 1 local_mon local_mon_pass master
+MINSUPPLIES 1
+NOTIFYCMD /etc/nut/notifycmd.sh
+POLLFREQ 5
+POLLFREQALERT 5
+HOSTSYNC 15
+DEADTIME 15
+NOTIFYFLAG ONLINE<----->SYSLOG+WALL+EXEC
+NOTIFYFLAG ONBATT<----->SYSLOG+WALL+EXEC
+NOTIFYFLAG LOWBATT<---->SYSLOG+WALL+EXEC
+NOTIFYFLAG FSD<><------>SYSLOG+WALL+EXEC
+# NOTIFYFLAG COMMOK<--->SYSLOG+WALL
+# NOTIFYFLAG COMMBAD<-->SYSLOG+WALL
+NOTIFYFLAG SHUTDOWN<--->SYSLOG+WALL+EXEC
+# NOTIFYFLAG REPLBATT<->SYSLOG+WALL
+# NOTIFYFLAG NOCOMM<--->SYSLOG+WALL
+# NOTIFYFLAG NOPARENT<->SYSLOG+WALL
+RBWARNTIME 43200
+NOCOMMWARNTIME 300
+FINALDELAY 5
+</file>
+<file ini /etc/nut/nut.conf>
+MODE=netserver
+</file>
+Start all services:
+<code bash>
+systemctl enable --now nut-server.service
+systemctl enable --now nut-monitor.service
+</code>
+Test with client:
+<code bash>upsc UPS3000XL</code>