meta data for this page
  •  
Book Creator
 Add this page to your book
Book Creator
 Remove this page from your book  

 Manage book(0 page(s))
 Help

This is an old revision of the document!

Disk matrix

SAS

2 communication channels (redundancy)

SATA

1 communication (half-duplex channel)

HPE M6510

  • Model: 3PARA-ST1111
  • 24 x 2,5“
  • SAS 6Gb

Dell PowerVault MD1200

  • 6Gps SAS
  • H800 controler with large disks support

Dell PowerVault MD1000 AMP01

https://www1.la.dell.com/lc/en/corp/Storage/pvaul_md1000/pd.aspx?refid=pvaul_md1000&s=corp

  • Enables mixing SAS and SATA drives in a single enclosure
  • 15 drives backplane.
  • Old 3Gbps SAS enclosure
  • To be use with PERC5e and PERC6e. 32 bit addressing limits disks to 2TB.
  • Specification capacity 15 x 2TB max.
  • People reports that MD1000 backplane supports 3TB drives max.
  • SAS/SATA support:
    • Interposer card required for SATA drives when mixind SATA and SAS. Interposer “emulates” SAS interface for SATA drive.
    • One guy confirms that SATA drives works without interposer cards.
    • There is label on disk caddy “SAS” or “SATAu”
      • SATAu caddy has interposer mounted, and disck is mounted a bit shifted to front to make space for interposer card

EMM

AMP01-RSIM

  • Two (redundant) IN ports (multiple standards, depends on product number)
  • one SAS OUT port to next module.
  • one ethernet port
  • one service port

Part number:

  • M999D,59V6C,6706C,GY794 - ! only one SAS IN port ???
  • 0P2GW4, MW736, CM669, MW726, X2R63, P809D, - 2x iSCSI IN ethernet ports

  • ??? - 2x SAS IN ports

AMP01-SIM

  • One SAS port IN
  • One SAS port OUT to chain to next matrix

Part numbers: CK614 TH262 HM240 JT517 - SAS/SATA