meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
home_automation:esp8266:hw:gosund_sp111 [2020/12/20 18:59] – niziakhome_automation:esp8266:hw:gosund_sp111 [2020/12/20 21:18] (current) – niziak
Line 75: Line 75:
  
 </code> </code>
 +
 +====== ESPHome Config ======
 +
 +[[https://github.com/jaddel/ESPhome/blob/master/Devices/Smart%20Plug%20-%20Gosund%20SP111|Smart Plug - Gosund SP111]]
 +[[https://frenck.dev/calibrating-an-esphome-flashed-power-plug/|Calibrating an ESPHome flashed power plug]]
 +
 +<file yaml gosund_sp1.yaml>
 +esphome:
 +  name: gosund_pralka
 +  platform: ESP8266
 +  board: esp01_1m
 +  esp8266_restore_from_flash: true
 +
 +wifi:
 +  ssid: "myssid"
 +  password: "mypass"
 +
 +  # Enable fallback hotspot (captive portal) in case wifi connection fails
 +  ap:
 +    ssid: "Gniazdko Sp biuro"
 +    password: "Tmk9tzAUQmr8"
 +
 +captive_portal:
 +
 +# Enable logging
 +logger:
 +
 +# Enable Home Assistant API
 +api:
 +
 +ota:
 +
 +binary_sensor:
 +  - platform: gpio
 +    name: "Power Button"
 +    pin:
 +      number: GPIO13
 +      inverted: true
 +    on_press:
 +      - switch.toggle: relay
 +
 +switch:
 +  - platform: gpio
 +    id: relay
 +    name: ON/OFF
 +    pin: GPIO15
 +    on_turn_on:
 +      - light.turn_on: led
 +    on_turn_off:
 +      - light.turn_off: led
 +
 +
 +time:
 +  - platform: homeassistant
 +    id: homeassistant_time
 +    timezone: Europe/Warsaw
 +    
 +substitutions:
 +  plug_name: GspBiuro 
 +  # Higher value gives lower watt readout
 +  current_res: "0.0012"
 +  # Lower value gives lower voltage readout
 +  voltage_div: "771"
 +
 +# Enable Web server
 +web_server:
 +  port: 80
 +
 +sensor:
 +  - platform: wifi_signal
 +    name: "${plug_name} - WiFi Signal"
 +    update_interval: 6s
 +  
 +  - platform: uptime
 +    name: "${plug_name} - Uptime"
 +    icon: mdi:clock-outline
 +    update_interval: 60s
 +    
 +  - platform: hlw8012
 +    sel_pin:
 +      number: GPIO12
 +      inverted: True
 +    cf_pin: GPIO05
 +    cf1_pin: GPIO04
 +    current_resistor: ${current_res}
 +    voltage_divider: ${voltage_div}
 +    
 +    current:
 +      name: "${plug_name} - Ampere"
 +      unit_of_measurement: A
 +      accuracy_decimals: 3
 +      icon: mdi:flash-outline
 +      
 +    voltage:
 +      name: "${plug_name} - Volt"
 +      unit_of_measurement: V
 +      accuracy_decimals: 1
 +      icon: mdi:flash-outline
 +      
 +    power:
 +      name: "${plug_name} - Watt"
 +      unit_of_measurement: W
 +      id: "${plug_name}_Wattage"
 +      icon: mdi:flash-outline
 +      
 +    change_mode_every: 4
 +    update_interval: 3s
 +    
 +  - platform: total_daily_energy
 +    name: "${plug_name} - Consumption"
 +    power_id: "${plug_name}_Wattage"
 +    filters:
 +        # Multiplication factor from W to kW is 0.001
 +        - multiply: 0.001
 +    unit_of_measurement: kWh
 +    icon: mdi:clock-alert 
 +
 +text_sensor:
 +  - platform: version
 +    name: "${plug_name} - ESPHome Version"
 +
 +output:
 +  # Relay state led
 +  - platform: esp8266_pwm
 +    id: state_led
 +    pin:
 +      number: GPIO2
 +      inverted: true
 +
 +light:
 +  # Relay state light
 +  - platform: monochromatic
 +    output: state_led
 +    id: led
 +
 +# Uses the red LED as a ESPhome status indicator
 +status_led:
 +  pin:
 +    number: GPIO0
 +    inverted: true
 +    
 +</file>
 +
 +Upgrade from Tasmota:
 +<code bash>
 +run esphome config.yaml compile
 +
 +Creating BIN file ".pioenvs/gosund_1a5f71/firmware.bin" using "/root/.platformio/packages/framework-arduinoespressif8266/bootloaders/eboot/eboot.elf" and ".pioenvs/gosund_1a5f71/firmware.elf"
 +</code>
 +
 +Or ''compile'' and ''download binary'' from dashboard.
 +
 +