meta data for this page
This is an old revision of the document!
Flashing firmware
When Chip is powered on, with GPIO0 pulled up, it enter into firmware downloading mode.
esptool
Download / install / git clone esptool.
Example usage:
./esptool.py --port /dev/ttyUSB1 --baud 9600 write_flash 0 ../nodemcu_float_0.9.6-dev_20150704.bin
Connecting... Erasing flash... Writing at 0x00001400... (1 %)
Erasing flash... Wrote 462848 bytes at 0x00000000 in 520.5 seconds (7.1 kbit/s)... Leaving...
ESP-01
./esptool.py --port /dev/ttyUSB1 --baud 9600 write_flash 0 ../nodemcu_float_0.9.6-dev_20150704.bin
ESP-12
./esptool.py --port /dev/ttyUSB1 --baud 115200 write_flash 0 ../nodemcu_float_0.9.6-dev_20150704.bin
nodemcu-master-14-modules-2016-06-27-15-50-54-float.bin