meta data for this page
This is an old revision of the document!
ESP Easy
Emergency reset
During power up, if TX & RX lines are tied together. Device is sending two bytes (115200 speed): 0xAA 0x55 and after 1ms checks if two the sames bytes are received.
Firmware build
git clone https://github.com/esp8266/Arduino.git esp8266 cd esp8266/tools python get.py cd ../.. git clone https://github.com/plerup/makeEspArduino.git cd makeEspArduino ESP_ROOT=../esp8266 make -f makeEspArduino.mk upload
makeEspArduino targets:
- upload: all - build all and use esptool to upload firmware
- clean
- all