Table of Contents

Zigbee

Conbee II

[257306.722765] usb 1-2.3.4.4: new full-speed USB device number 15 using xhci_hcd
[257306.959564] usb 1-2.3.4.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[257306.959570] usb 1-2.3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[257306.959573] usb 1-2.3.4.4: Product: ConBee II
[257306.959574] usb 1-2.3.4.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[257306.959575] usb 1-2.3.4.4: SerialNumber: DE2670522
[257307.040638] cdc_acm 1-2.3.4.4:1.0: ttyACM0: USB ACM device
[257307.040657] usbcore: registered new interface driver cdc_acm
[257307.040659] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

Firmware update

Easy way

It can be done using deCONZ integration for while and then switch back to Zigbee2MQTT

Host shell way

NOTE: Doesn't work in Proxmox's USB forwarded device/port. After device reset it cannot be detected by flasher.

docker ps
ha addons stop 45df7312_zigbee2mqtt
 
docker  run -it --rm --entrypoint "/firmware-update.sh" --privileged --cap-add=ALL \
-v /dev:/dev -v /lib/modules:/lib/modules -v /sys:/sys deconzcommunity/deconz
...
docker rmi deconzcommunity/deconz
ha addons start 45df7312_zigbee2mqtt

NOTE: Workaround: connect ConBeeII to Linux PC and run only flasher:

docker  run -it --rm --entrypoint "/firmware-update.sh" --privileged --cap-add=ALL \
-v /dev:/dev -v /lib/modules:/lib/modules -v /sys:/sys deconzcommunity/deconz