====== STP / RSTP ======

===== getting info =====

<code>
show spanning-tree
show spanning-tree bridge
show spanning-tree detail
show spanning-tree vlan 28
</code>

===== RSTP =====

<code>
show spanning-tree summary
enable
config
spanning-tree mode ?
spanning-tree mode rapid-pvst

spanning-tree vlan 1 priority 57344
spanning-tree vlan 2 priority 57344
spanning-tree vlan 28 priority 57344
spanning-tree vlan 255 priority 57344
end
show spanning-tree bridge
wr
</code>

Disable STP:

<code>
enable
config terminal
Switch(config)#no spanning-tree vlan 1-2,28,36,255
wr
copy run star
</code>

Enable STP trunk on one port:
<code>
interface GigabitEthernet1/1
no switchport nonegotiate
switchport mode dynamic auto
end
</code>

===== Inconsistent port type =====

Port ''Gi0/48'' is an uplink to another switch:

<code>
.Aug 19 10:12:00.074: %SPANTREE-7-RECV_1Q_NON_TRUNK: Received 802.1Q BPDU on non trunk GigabitEthernet0/48 VLAN1.
.Aug 19 10:12:00.074: %SPANTREE-7-BLOCK_PORT_TYPE: Blocking GigabitEthernet0/48 on VLAN0001. Inconsistent port type.
.Aug 19 10:12:18.395: %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking GigabitEthernet0/48 on VLAN0001. Port consistency restored.
</code>

Setup uplink port as ''trunk''
<code>
enable
conf term
interface Gi0/48
spanning-tree portfast trunk
switchport mode trunk
</code>

Setup all end-user ports ''0-47'' as:
<code>
enable
conf term
interface range Gi0/1-47
no switchport mode trunk
spanning-tree portfast
# optional
# don't expect bpdu packets - but it can create loops in LAN!
spanning-tree bpdufilter enable
spanning-tree bpduguard disable
</code>