====== Latest 5.8 Kernel ======

Latest 5.8 Kernel: [[https://forum.doozan.com/read.php?2,12096|Linux Kernel 5.8.3 Kirkwood package and Debian rootfs]]

<code bash>
dpkg -i linux-headers-5.8.3-kirkwood-tld-1_1.0_armel.deb
dpkg -i linux-image-5.8.3-kirkwood-tld-1_1.0_armel.deb
</code>

Becasue I'm using still old U-Boot: ''U-Boot 1.1.4 (Jun  8 2011 - 18:48:37) Marvell version: 3.4.19''  it is need to append FDT:
<code bash>
cp -a zImage-5.8.3-kirkwood-tld-1 zImage-5.8.3-kirkwood-tld-1.fdt
cat /boot/dts-5.8.3/kirkwood-nsa310.dtb >> zImage-5.8.3-kirkwood-tld-1.fdt

mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.8.3-kirkwood-tld-1 -d zImage-5.8.3-kirkwood-tld-1.fdt  ./uImage-5.8.3
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-5.8.3-kirkwood-tld-1 -d ./initrd.img-5.8.3-kirkwood-tld-1 ./uInitrd-5.8.3

rm zImage-5.8.3-kirkwood-tld-1.fdt
</code>

<code text>
Image Name:   Linux-5.8.3-kirkwood-tld-1
Created:      Sun Nov  1 17:53:32 2020
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    12568 Bytes = 12.27 kB = 0.01 MB
Load Address: 00008000
Entry Point:  00008000

Image Name:   initramfs-5.8.3-kirkwood-tld-1
Created:      Sun Nov  1 17:53:32 2020
Image Type:   ARM Linux RAMDisk Image (gzip compressed)
Data Size:    10037699 Bytes = 9802.44 kB = 9.57 MB
Load Address: 00000000
Entry Point:  00000000
</code>

And configure U-Boot to boot form new image:
<code bash>
fw_setenv load_ide_58 'ide reset; ext2load ide 0:3 0x800000 /uImage-5.8.3; ext2load ide 0:3 0x1100000 /uInitrd-5.8.3;'
fw_setenv bootcmd_ide_58 'run load_ide_58; bootm 0x800000 0x1100000;'
fw_setenv bootcmd 'run load_ide_58; bootm 0x800000 0x1100000;'
</code>


====== zram ======
<code bash>
apt-get install zram-tools
</code>

<file init /etc/default/zramswap>
# Specifies amount of zram devices to create.
# By default, zramswap-start will use all available cores.
CORES=1

# Specifies the amount of RAM that should be used for zram
# based on a percentage the total amount of available memory
#PERCENTAGE=10

# Specifies a static amount of RAM that should be used for
# the ZRAM devices, this is in MiB
#ALLOCATION=256

# Specifies the priority for the swap devices, see swapon(2)
# for more details.
PRIORITY=100
</file>

<file bash /etc/rc.local>
...
/usr/sbin/zramswap start
</file>

<code bash>
zramswap start
zramswap status
</code>