Manual:
{{:hw:gt06_gps_tracker:tk06a.pdf|}}

Default password is ''123456''

====== SMS commands ======
^ SMS                         ^ response         ^ description     ^
|                             |                  | factory reset  |
| #begin#123456#              | begin ok!        | Initalization   |
| #password#123456#333444#    | password ok!     | set new password (6 digits)        |
| #resume#                    | resume password, password is 123456 | restore original password |
| #admin#123456#+48600123456# | admin ok!        | set authorized number    |
| #admin#123456#n1#n2#n3#n4#  | admin ok!        | set authorized numbers (up to 4)    |
| #noadmin#n1#                | no admin ok!     | remove authorized number |
|                             | reboot |
| #timezone#123456#E#1#00#    | set time zone OK ! | set time zone to +1 |
| #timezone#123456#W#5#30#    | set time zone OK ! | set time zone to -5:30 |
|                             |                    |                         |
| TCP                         | <nowiki>www.gps228.com:8169:internet:V</nowiki> | query current internet settings. V - invalid fix A - valid GPS fix|
| #apn#123456#apn#user#pass#  | apn ok!     | configure APN for GPRS |
| #apn#123456#internet###     | apn ok! |configure APN without user and pass |
| #IP#123456#5.3.2.1#5023#    | set ip address and port ok!     | configure tracking server and port |
|                             | |
| #stockade#123456#radius#    | | radius in hundreds of meters
| #stockade#123456#3#         | stockade ok! | set geo-fence radius to 300 meters |
| #nostockade#123456#         | no stockade ok | 
|                             |   |
| #speed#123456#090#          | speed ok! | set speed alarm to 80km/h |
| #nospeed#123456#            | cancel speed ok! | cancel speed alarm |
| | |
| #ACC#ON#                    | | set alarm when vehicle ignition is turned on |
| #ACC#OFF#                   | | 
|    | |
| #stopoil#123456#            | | cut oil |
| #supplyoil#123456#          | | restore oil |
| #stopelec#123456#           | | n.r. |
| #supplyelec#123456#         | | n.r. |
| | |
| #at#30#sum#0#               | auto track set ok! | start tracking (keep TCP connection to tracking server and report every 30 sec)|
| #at#30#sum#10#              |                    | start tracking (like above) but stop tracking after sending 10 locations|
| #noat#123456#               | cancel auto track ok! | stop tracking  | 
| | |
| #smslink#123456#            | /see below/ | request single location response |
| DW                          | link with location | request location link |
|     | |
| #monitor#123456#            | monitor ok! | switch to monitor mode. CAll will be answered by tracker and you can hear sound from microphone |
| #tracker#123456#            | tracker ok! | restore default tracker mode |
| #call#123456#               | call ok!    | switch to phone mode, you can establish two-way phone call. Pick-up call with SOS button |


[[http://nyomkoveto.top5.hu/img/gt06-N/GT06N-D_sms_parancsok.pdf]]
[[http://www.chinagpstracking.com/pic/201182224310734.pdf]]



====== Modes ======
  * Tracker - Default mode.
  * Monitor - see command <code>#monitor#pass#</code>
  * Call    - see command <code>#call#password#</code>

====== Getting single location ======

===== by call =====
If there is no authorized number set, every number can call tracker and get SMS with location.
After 2 rings, tracker will reject call, and after a while caller gets SMS with location
<code>
http://maps.google.com/maps?g=N0.000000,E0.000000
Speed: 000.0 km/h
Time: HH:MM:SS Date:YY/MM/DD
IMEI: 123456789012345
</code>

===== by SMS =====
send command: <code>#smslink#123456#</code>

====== Continous tracking ======
See command <code>#at#</code>

====== Events ======

===== No power =====
With GPS fix:
<code>
cut power
alert!IMEI:123456789012345
00.000000,N,00.000000,E
</code>
With no fix:
<code>
cut power
alert!IMEI:123456789012345
0.000000
</code>

===== Move alarm =====
<code>
Move alarm
IMEI:123456789012345
00.000000,N,00.000000,E
</code>