====== Zigbee ======

===== Conbee II =====
<code>
[257306.722765] usb 1-2.3.4.4: new full-speed USB device number 15 using xhci_hcd
[257306.959564] usb 1-2.3.4.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[257306.959570] usb 1-2.3.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[257306.959573] usb 1-2.3.4.4: Product: ConBee II
[257306.959574] usb 1-2.3.4.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[257306.959575] usb 1-2.3.4.4: SerialNumber: DE2670522
[257307.040638] cdc_acm 1-2.3.4.4:1.0: ttyACM0: USB ACM device
[257307.040657] usbcore: registered new interface driver cdc_acm
[257307.040659] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
</code>

==== Firmware update ====

  * [[https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Firmware-Changelog|Firmware Changelog]]
  * [[https://deconz.dresden-elektronik.de/deconz-firmware/?C=M;O=D|deconz-firmware]]

===== Easy way =====

It can be done using ''deCONZ'' integration for while and then switch back to ''Zigbee2MQTT''

===== Host shell way =====

NOTE: Doesn't work in Proxmox's USB forwarded device/port. After device reset it cannot be detected by flasher.

<code bash>
docker ps
ha addons stop 45df7312_zigbee2mqtt

docker  run -it --rm --entrypoint "/firmware-update.sh" --privileged --cap-add=ALL \
-v /dev:/dev -v /lib/modules:/lib/modules -v /sys:/sys deconzcommunity/deconz
...
docker rmi deconzcommunity/deconz
ha addons start 45df7312_zigbee2mqtt
</code>


NOTE: Workaround: connect ConBeeII to Linux PC and run only flasher:
<code bash>
docker  run -it --rm --entrypoint "/firmware-update.sh" --privileged --cap-add=ALL \
-v /dev:/dev -v /lib/modules:/lib/modules -v /sys:/sys deconzcommunity/deconz
</code>