====== NUT ======


===== install add-on =====

**Only need this to run local instance of NUT (server or client) also to perform auto shutdown of HA.**
It doesn't provide any integration (no entities).

Install and configure:

Settings --> Add-ons

"Home Assistant Community Add-on: Network UPS Tools"

===== add integration =====

To monitor remote NUT, it is only need to add simple integration:

Settings --> Devices & Services --> Add Integration

"Network UPS Tools (NUT)"

And provide host and credentials.

==== add disabled entities ====

By default only basic parameters are exposed as sensors (check source of: [[https://github.com/home-assistant/core/blob/ac6d7180949358d8f8708ae4a903312ca0bb739d/homeassistant/components/nut/sensor.py#L197|sensor.py]])

To enable ''apparent power'' and ''real power'' go to:

Settings --> Devices & Services --> Network UPS Tools (NUT)
Click on ''Device''
in the ''Diagnostic'' section you can see ''+16 entities not shown''. Click that.
Click disabled entity and change it properties by pressing ''enable''.